Saved Jobs

1. Laminates

2. Plywood / Board Types

3. Cutting Settings

Panel width/height in the table below is the finished size. If a panel has edge banding on the L/R/T/B checkboxes, that much is subtracted from the raw cut size on each banded edge so the panel comes out to the exact finished size once the tape is applied. A panel with a distinct Outer Laminate (different from its Inner Laminate) uses the outer thickness above; otherwise the inner thickness applies. Turn off "Include edge band thickness in cut size" to cut every panel at its exact entered size instead, ignoring the two thicknesses above — useful when banding is applied after cutting rather than accounted for in the cut list.

4. Hardware Settings

Import 3D Model (DAE/Collada or SKP)

Upload a DAE (Collada) export from SketchUp, Fusion 360, Blender or other CAD software — works instantly, parsed entirely in your browser. The tool reads the model's geometry, detects flat panel pieces, and lets you add them to the Panel Requirements list below with one click, instead of measuring and typing dimensions by hand.

You can also upload a native SketchUp .skp file directly — if this site has a 3D converter configured (Settings → Cutlist Basic 3D Converter), it's converted server-side and read the same way. Without one configured, export a .dae from SketchUp instead (File → Export → 3D Model → COLLADA), which needs no setup at all.

5. Panel Requirements